ok so im new at this,
i read the FAQ i just want to make sure befor i start cutting away at the
plastic welds. im going to be putting vinyl on the door
inserts and im just wonder what the best way to
put the insert back on is, in the FAQ it said to use
silicon cocking, has anyone used this or does anyone
have any other ideas sorry if this is a repeated question
but i dont think it is. thanx

when i did mine, I had a hell of a time trying to get em back on, but the best thing i found to use is liquid nails. Im re-doing mine this spring, and i think ill be drilling small holes and using zipties this time. the liquid nails works well, but too messy for me..




<A HREF="http://www.cardomain.com/id/eazy716"><IMG SRC="http://registry.gmenthusiast.com/images/eazy716/personal_pic.gif" BORDER="0"></A>

use plastic welder http://www.devcon.com/devconfamilyproduct.cfm?familyid=182
this is what i used and it works great, you will need a tube per side, but i got it for $2.38 at Walmart. so it is cheap and works good.

thanx for the info,

Quote:

Im re-doing mine this spring, and i think ill be drilling small holes and using zipties this time.

just wondering how ur gona do that
wont u see the zipties on the outside
of the doorpanel?

ok, maybe i got confused from the start. are you talking about the armrests, or the map pockets. the zipties i'll use for the map pockets. ill stick with the liquid nails for the arm rests. actually maybe ill try the plastic weld stuff




<A HREF="http://www.cardomain.com/id/eazy716"><IMG SRC="http://registry.gmenthusiast.com/images/eazy716/personal_pic.gif" BORDER="0"></A>

ooo, thanx yea i was talking about
the arm rests but that gives me a good
idea for the map pockets
thanx 4 the info