00-02 Gauge Needle Question - Interior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
00-02 Gauge Needle Question
Wednesday, March 16, 2005 10:22 PM
well i know that taking them OFF is suicide but i was wondering about just moving them. they accidentally got moved while i had the plastic off so i just moved them back to where they all are when the cars off. I need a person who ACTUALLY KNOWS if JUST MOVING them will completely mess them up like removing them does.








Re: 00-02 Gauge Needle Question
Wednesday, March 16, 2005 10:55 PM
i moved mine, and they seem to be fine. ive had em going after i moved them for almost 6 months now. just make sure they are in the same spot as they originally were




<A HREF="http://www.cardomain.com/id/eazy716"><IMG SRC="http://registry.gmenthusiast.com/images/eazy716/personal_pic.gif" BORDER="0"></A>
Re: 00-02 Gauge Needle Question
Thursday, March 17, 2005 12:28 AM
yeah had to move mine a bit to install guages, they're only fractions off now but I tested them to be sure they were pretty accurate and they were. I think there's a way to recalibrate but I'm unsure as to how.
Re: 00-02 Gauge Needle Question
Thursday, March 17, 2005 6:04 AM
The gauges self-home. If you think they are off, simply point all the needles straight up and then turn your car on. The gauges will all go to the "home" position, and reset. This only works on 00-05's





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: 00-02 Gauge Needle Question
Thursday, March 17, 2005 6:22 AM
Thanx Shifted







Re: 00-02 Gauge Needle Question
Saturday, March 19, 2005 1:56 PM
I bought a 00-02 cluster with tach for my step-dad and the fuel gauge was about a 1/4 tank below the E Mark, to reset your gauges just turn them to the right till it stops, and if you push alittle farther it'll reset that "home" position. That'll make it go up, to make it go down more do the reverse and push it further down the other way. It'll take a couple of times till you get it perfect. $35 for a cluster that i fixed in less than 5 minutes.


No mods...Yet
Re: 00-02 Gauge Needle Question
Friday, November 04, 2005 9:53 AM
Old post but possibly relevant to my question: Is there a solution similar to this for the 95-99 Js?


L8r...
____________
. . . . jb . . . .
...Son Fire!


*** Need some 1995 Cavalier parts ???
*** FOR SALE: doors, windows, interior, engine parts, fenders, etc. -- email me!
Re: 00-02 Gauge Needle Question
Friday, November 04, 2005 11:50 AM
my 02 i removed my needles,
they got stuck and wouldn't move after replacing them.....
i figured this out, the little motors still work after you remove the needles, but what happens, is that there are crimp points on the metal saft on the needle....
also when i pulled mine out, i had 1 needle that the metal shaft stayed in, that one i never had to mess with, but the others, i just shaved to crimp points off, recalibrated the cluster after quite a few tries, and another car to compare it to...
works great, I even got a chance to play with a couple of those speed check thingys on the side of a road and when i had it to 75 and 10-25, it was perfectly on mark!!!




wait for it... wait for it... NOW GO!! ---> '02 LS Sport <---
Yahoo IM : buzz122 AIM : buzz122cav
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search