Well my left drivers side window is starting to mess up on me. Sometimes it doesnt move at all and im scared to roll it down because it might get stuck. Anyone have any tutorials on how to do it? And i can't get the little motor thing out.
http://www.j-body.org/forums/read.php?f=11&i=80930&t=80930#80930
I hope that helps. From the sound of things, you can put your door panel back on, clean the switch, and call it a day.
Good luck Jason, let us know how it turns out.
I would also like to vote to make that thread I posted a Sticky
I know it's JUST a Cavalier, and I'm sorry if I hurt your ego.
Myself and a friend of mine replaced the motor on my driver-side when it stopped working. You have to drill out the rivits. This is a pain in the ass to replace too because you are working in such a narrow space.
Sold the Z24
LIKWIT Z wrote:Myself and a friend of mine replaced the motor on my driver-side when it stopped working. You have to drill out the rivits. This is a pain in the ass to replace too because you are working in such a narrow space.
Don't forget, his power windows are working on and off. I would think if it was the motor he'd have different problems. Window slowing down when opening/closing, motor noise, etc...
From what I gathered, his window is working, but not 100%. Which kinda made me think that the contacts inside the switch are a little crudded up, and need to be cleaned.
I know it's JUST a Cavalier, and I'm sorry if I hurt your ego.
I think i have to replace the motor because sometimes it gets stuck half way and i have to press down and up so it will roll up.
Hmm I see...
Well keep in mind you can run into a problem with only one side of the switch too.
But whatever the problem is, good luck on the fix
I know it's JUST a Cavalier, and I'm sorry if I hurt your ego.
Any luck figuring this out yet?
I know it's JUST a Cavalier, and I'm sorry if I hurt your ego.
im thinkin i have to replace my passenger side motor cause if it goes down more than half way, its takes forever to roll back up
"sometimes the respect is more important..."
Ok well I don't have time to fix it right now im just busy with a lot of things but probably by tomorow I'm going to check this out...thanks for the help ill keep u updated
Well i just cleaned the switch and its still the same. So i guess its the motor then
