has any had the 2 piece doors and fiberglassed them together? and if so, how does it hold, does it feel like it'll break apart. I'm considering doing this... Thanks
<img src="http://registry.gmenthusiast.com/images/edp/personal_pic.jpg" height= 200>
i just did mine this past weekend. i havent got to sanding and painting, but it feels rather strong
<A HREF="http://www.cardomain.com/id/eazy716"><IMG SRC="http://registry.gmenthusiast.com/images/eazy716/personal_pic.gif" BORDER="0"></A>
alright then ill end up doing it im sure, if they turn out bad ill just go get the ones that were made in one piece.
<img src="http://registry.gmenthusiast.com/images/edp/personal_pic.jpg" height= 200>
sndsgood wrote:if its done right it will hold no problem. if its done wrong its going to come off.
exactly. make sure you drill holes for the resin/glass to go through, and glass both sides so it wont just pull off
<A HREF="http://www.cardomain.com/id/eazy716"><IMG SRC="http://registry.gmenthusiast.com/images/eazy716/personal_pic.gif" BORDER="0"></A>
yeap..... i drilled holes all over mine and am glassing both sides...
it will hold better if you do that
I plan to glass the doors and upper dash this weekend, and was wondering do you have to glass the entire underside? or just around the areas where the holes are drilled in at?
Duramix 40/40 plastic weld
