How hard would it be to put power windows in an '03 Cavalier Base Sedan? Very?
i got a spal kit and picked up the stock power window switches for a 04 cavy, but have not been able to install them for months because I dont have a wire diagram for the stock switches. Can anyone help me out with that?
not very hard its really easy. got it down after i got the diagram took me about 2-3 hours 2 install because i connected it to my new battery in the trunk were i run my windows, neons at this moment. if you need any other help just email me and ill try and help.. (salmedina1@netzero.com)
----------------------------------------------------------------------------------------------------------------------
^^^^^^^^^^^^^^^CAVRIDER^^^^^^^^^^^^^^^
It should be easy, just follow the wiring diagrams provided above.
hey Sal Medina, do have the powerlock diagram? if so can you email it to me.
i need to connect stock powerlock with module for remote control!
thanx!
i do have them. i bought the book. i cant remember its name right now. that book that you could get at auto zone where it tells you how to do everything. well that should have all the diagrams for every year from 95-05 i think....when i have time 2 scan it i will post it here. but i dont think i could scan it anytime soon.......by this weekend for sure....
----------------------------------------------------------------------------------------------------------------------
^^^^^^^^^^^^^^^CAVRIDER^^^^^^^^^^^^^^^
that wold be great. All i have found is diagram without the module, and these diagram have like 5 wires going out of the switch, and on my cars there is only 3!!!
I wanna know how to wire that module.
thanx!
can you send me the diagram please?
thanx!
Easy to install, just take your time and think a little
always work !!
~TaKa~
My CarDomain
but the thing is that i dont know how to remote module works, at the junkyard, i found j-body that had 3 wire for lock switch and other that have 5 wire. mines have 3. all diagram that i have seen have 5 wire. so i dont know and i need help!!!!!!!!!!!!!!!!!!!!!!!!!!
most/all aftermarket power window kits coem with a plug that goes in the hole.
._____________________________.
Causa latet vis est notissima
DIY Clear 03+ Headlights
I have a problem with my power windows too..... Besides the motors being slow as molasses but the switches are crap. I have some factory switches but I don't know what the pins on the switch correspond to . I tried playing with different setups but I ended up frying my wires....
[IMG]http://memimage.cardomain.net/member_images/2/web/2066000-2066999/2066649_10.jpg
I know this thread is so old but....
By looking at this diagram I can't tell which pins are which. All I have is the switches not the wiring harness or anything. It's like 7 little pins in the bottom of the switch but how I know which one controls what? Sal? Anyone???
any suggestions on a good brand?
