Well I just got my whiteface glo gauges in from ebay, they're deffinitly awesome. Only thing I can't figure out is what to connect the power wire to. This is in an 02 Cavalier. I had them in my 99 and I connected them to the gray and black wires from the Hvac but its different in the 02. I tried just running it to the Cluster fuse and that didn't work. Also my clusters makin some funny noises now. Can anyone help me out? THANKS!

Any 12V power source that is hoot when the parking lights are on. I got mine tapped off of the left side parking light. I used a test light to find which wire has power when parking lights are on. Hope that helped.


00 Z-24 S/C

I'm just wondering then why it didnt work when i hooked it up to the cluster fuse?

Mine is wired into the dimmer switch, black to black, and red to yellow I belive.

Hmm...anyone else know exactly? I think I already messed up my cluster tryin to run it to that fuse..it sounds like its throwin up on my dash when i turn the key, haha.

hook the + to the brown wire and the ground to the metal thing that holds the ecu clip you will see what I meen once you get up under there


A J-body owner since 1998
91 cavy, 99 sunfire, 00 cavy
06 cobalt SS/SC YELLOW
09 cobalt SS/TC sedan WHITE 1 of 41

sorry dubble post the noise check to make sure that the gauges are all the way down when I hooked mine up there was a funny sound and the tack stoped working I took them apart and the gauge needed to be pushed down. also the brown wire is just next to the gray one going to your fuse panel, it actualy needs to be grounded to metal. any probloms email me at jason.whited@insightbb.com


A J-body owner since 1998
91 cavy, 99 sunfire, 00 cavy
06 cobalt SS/SC YELLOW
09 cobalt SS/TC sedan WHITE 1 of 41