I tried to paint the panels but it didnt turn out the way i wanted it to and i dont want to start over I was wondering if anyone has vinyled their complete doors and if so how hard was it and does anyone have pictures

Got any pics of urs??
IDK how to do the vinyl and such but i'd like to see what you did to yours.

-Seth

my door panels? i painted one and it turned out like crap so now i want to vinyl them and I dont know what they will turn out like? What does IDK mean?

IDK = "I don't know"
Your best bet might be to search thru the photos and media section and like search interior or something.
I can't think of anyone off hand at the moment.
Also, someone might chime in with their setup.

-Seth

did you prep them or anything or just spray paint right on it?

i sanded with 80 then 120 then primed then wet sanded with 400 then painted then wet sanded with 800 then cleared then wet sanded with 1000 and then buffed, some parts are just awesome but you can see where i didnt sand enough and some spots are real scratchy looking, so i dont want to sand it all down to plastic again i just want to cover them if its possible

unless your great at vinyl and upolstery work i'd send it to a pro. even for a pro to get right to wrap the entire door your going to have to do some stiching to get it down into all the curves and such, its not somehing u can just spray glue on and stick the vinyl on and be done.


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography

8 posts below yours. search plz

http://www.j-body.org/forums/read.php?f=45&i=69154&t=69154