I was messing around with my sparco steering wheel today and I was going to fab up something to connect the horn and the screws that hold the wheel onto the quick release sripped where you put the allen key into them. My question is one, how do I remove them? and two, where can I get more like it so I can replace them? Thanks for all your help guys.
the best thing i can think of is use some really good glue and glue the allen key into it..wait to dry...and unscrew and repeat for all the stripped screws. it kinda sucks but its probably your best shot. good luck
2002 Cavalier 2200----- Buffalo, NY
Any suggestions of where I could get new ones?
What's funny? Do'nt you think that if you were in this situation you would want someone helping you?
use a set of needle nose and slowly rotate COunter Clockwise?
i would contact the company to get new ones. they sure are easy to strip though.
i have a spare wheel with all the hardware(not adaptor) im selling for like $30
Eazy to you have any suggestions to remove the current screws? Because I'm thinking of getting allen adaptors for my impact and trying that but you've seem to pull through for me in the past, so what do you think?
Use a left handed drill bit and drill them out. Get new ones.
That's what I ended up doing STLWACO, and if any one needs to know how to hook up the horn, let me know in a pm or e-mail me and I'll guide you through it.
