I have had the new window motor for the drivers door for over a month now. Just haven't brought it anywhere yet. anyone know how much that would cost or anyone on here know how to do it? my window will not go up now and i need to get this new motor in.
You can do it yourself if need be (I've done both windows) but no clue on how much a shop would charge.
*****************************************************
*
* Student of the University of Oklahoma. Go Sooners!
*
*****************************************************
Should be pretty easy. If you're in the Baltimore Maryland area I'll help you out!
i live in new jsery. i really dont have the confidence to drill out the rivets. any advice is helpful
Where in Jersey? And what kind of car--cav or sunfire, and year? I am in central Jersey....I guess I could help ya out maybe.
Sam
Ban low-performance cars, not high-performance ones.
Outside of burlington. i got a 4 door 01 cav. i hate not being able to lower my window. i really miss drive thru. like i said i dont have the guts to put the motor in
It really isn't that hard to do but you could try posing in the regional forums and see if there's anybody near you who could help out.
*****************************************************
*
* Student of the University of Oklahoma. Go Sooners!
*
*****************************************************
Dealership will charge about $300, because its a PITA to install.
Most shops in NY do it for about $250.
You dont need to drill out the rivits, Just grind the heads away. And instead of reinstalling rivits use 1.25 x 1.50 screws and nuts.
IM me, atroxaranea....Ill see what I can do.
Ban low-performance cars, not high-performance ones.
