I just picked up racing seats. Now, on the passeneger side the seatbelt clip (where you insert the seatbelt into) is not attached to the seat (it is attached to the floor or something), but on the driver side it is attached to the seat. So when I took out my stock seats and installed the racing seats, I could still use the seatbelt on the passenger side, but not longer on the driverside. How should I go about installing the clip back on the driverside soI can use my stock seatbelt?
Also, I've been trying to read up on harness bars. From what I have found from reading, it seems as if there are no safe harness bars avaliable for use of a 4-point harness in a sunfire. Am I correct, or did I miss something? If I can't find a safe way to use my 4-point harness, I am just going to get the clip reattached and use my stock seatbelts.
Thanks guys.
Wide Body Progress
what seats, and is there a bolt available for the lower side of the seat to hold the female side of the seat belt mechanism?
When I installed my racing seats, my racing seat had a big bolt that connects the two halves together. They are the seats off of A+ Performance by the way. The bolt was on the side where the seat belt connector should be too which worked out nice. Ironically, the bolt in the seat, was the same exact bolt used in bolting the stock seatbelt to the stock seats, so all I did was take off the bolt on the racing seat, connect the seat belt connector to that, and put it back together. Works the same way as the passgner side now and looks stock
The seats are 3A Leather Racing seats. Pics can be seen on my cardomain page. I figured that I would look for a bolt on the seat and just do that, but I haven't had time to take the seat out and check.
Thanks guys.
And can anyone address this question?
"Also, I've been trying to read up on harness bars. From what I have found from reading, it seems as if there are no safe harness bars avaliable for use of a 4-point harness in a sunfire. Am I correct, or did I miss something? If I can't find a safe way to use my 4-point harness, I am just going to get the clip reattached and use my stock seatbelts."
Wide Body Progress