Just wondering if anyone has a good way to remove the window cranks on a 95 cavalier without getting the GM crank puller. Held on by a little C-clip almost inside the crank making it hard to get any kind of tool in there to pop it off.

Also just ordered my Momo hub adaptor and was wondering how easy/hard it is to remove the steering wheel without the steering wheel puller.

Use a rag folded over flat once or twice....

Slip it behind the handle & lift up while sliding it around a little bit & they pop right off...

as red devil said. or go buy the 5$ tool. as for the momo hub i'd say go buy a puller they are only like 15$


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography

I tried what RedDevil did however I can't seem to get it to budge. Any other suggestions that wont consist of me having to go buy a tool to do it?



http://nwgme.org

get a knife or flat head screwdriver

point the handle up then start to pull it towards you and you'll be able to see behind the crank a little bit. by pointing the handle straight up, the C clip ends will be facing staight up too. take a knife or flat head and push down on one of the legs and it will pop right off. took me all of 10 seconds on mine

i used needle nose plyers and then a thick paper clip, took 10 seconds a piece... and it was first time getting a clip like that ff of anything...


~GERG~~04 Sunfire on DUB minus 2's!
~B&M Shorty~DC Sports Front Strut Bar~RKSport Spark Conductor Coils~K&N Typhoon Intake
Check my site for mods!

ah ok thats why I was havin trouble. Thanks



http://nwgme.org