Console question - Interior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Console question
Monday, March 19, 2007 5:54 PM
I was wondering if a 00 console with power windows/5 spd is interchangeable with a 95-99 z console 5spd? im wanting to put a 00+ console in my 97 Z but dont know if everything will line up. Thanks






Re: Console question
Monday, March 19, 2007 5:59 PM
should be. I went the more difficult way and did a Sunfire Console swap. I find it to me more comfortable to rest your arm on when driving


...

Re: Console question
Monday, March 19, 2007 6:02 PM
cool...my main concern is if the plug in for the windows will work? I figure the holes will line up..so mainly im concerned about the wiring for the windows.



Re: Console question
Monday, March 19, 2007 6:36 PM
i dunno about the plug, but i do know that the console will fit. you will need the metal bracket under it tho.
i did it





Re: Console question
Tuesday, March 20, 2007 12:29 PM
What metal bracket?



Re: Console question
Tuesday, March 20, 2007 12:34 PM
the one under the console in the front. where there is this screw, it bolts to that bracket holding the front of console



Re: Console question
Tuesday, March 20, 2007 1:24 PM
I didn't use the bracket when I swapped to the Sunfire console. But it fits in so damn tight, it doesn't move even when you push on it.

The electrical should be fine. Worse case you can just put your power window switches in that console. Thats what I had to do because I got one with out power options. However, the Cavalier switches were a little more narrow compared to the Sunfire area to mount them in.


...

Re: Console question
Tuesday, March 20, 2007 1:45 PM
i dunno about the sunfire, i never took it out of mine but on my Z, i had to take the bracket from the 00 one.



Re: Console question
Friday, March 23, 2007 3:15 AM
Full Cav Effect (stenger) wrote:I didn't use the bracket when I swapped to the Sunfire console. But it fits in so damn tight, it doesn't move even when you push on it.

The electrical should be fine. Worse case you can just put your power window switches in that console. Thats what I had to do because I got one with out power options. However, the Cavalier switches were a little more narrow compared to the Sunfire area to mount them in.


reason for the bracket is to have it straight and line up. if you just put a 00+ console in the 95-99 (cavaliers at least) without swapping the bracket, the console will sit slightly crooked and the bolt behind the shifter is no where near to lining up.




5 YEAR ANNIVERSARY FREEBIE GIVEAWAY - CLICK HERE TO ENTER
What you know about Street Racing anyways? Only what Fast & Furious taught us....
SO EVERYTHING!
Re: Console question
Saturday, March 24, 2007 7:08 AM
i have a question around the same lines as this one to. im not sure what years it is but the cavi or sunfire consule with the two cup holders in front of the shifter im looking to find on of those. i have a 97 z24 auto that i wanna put the 5spd consule with the two cup holders in.... i wanna make it look like a 5spd and i like cup holders haha any one no if that will come anywhere near fitting ???? *
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search