power lead for power windows? - Interior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
power lead for power windows?
Saturday, April 21, 2007 10:28 AM
Ok, I'm going from manual to power windows right now, and I have an 02 sf. I noticed on the fuse panel there is a spot for a fuse for power windows, and on the back of the fuse panel, 2 wires coming out and joining the harness thats back there. I'm assuming that power to that fuse is already there, and all I have to do is figure out where the lead goes to. Does anyone know where that wire comes out at, if at all?





Re: power lead for power windows?
Saturday, April 21, 2007 11:24 AM
MoNkeE wrote:Ok, I'm going from manual to power windows right now, and I have an 02 sf. I noticed on the fuse panel there is a spot for a fuse for power windows, and on the back of the fuse panel, 2 wires coming out and joining the harness thats back there. I'm assuming that power to that fuse is already there, and all I have to do is figure out where the lead goes to. Does anyone know where that wire comes out at, if at all?


if you have a sunroof I'd recommend tapping into the wiring coming off the circuit breaker in the fuse panel. You dont want to have your windows down, start to rain, and have a fuse pop.

In answer to your question, I hear there's a green connector behind the front carpeting on the drviers side thats the plugin for power windows. I could be wrong though...
Re: power lead for power windows?
Sunday, April 22, 2007 6:19 PM
Thanks I found that green connector you were talking about but it didn't seem to go over to the center console for the switches. I ended up using the leads for the accessory power outlet and just put a higher amped fuse in at the fuse panel, hopefully that holds up.




Re: power lead for power windows?
Friday, May 04, 2007 12:06 PM
hi, i want to do the same thing as you. does it cost you a lot for the materials ans to do you're ? how much? if you do it yourself, is it a hard job?
thanks for the answer!!!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search