I read the FAQ so please don't attack me.
I need to get it out, but it won't budge.
The FAQ says just pull and it'll eventually come out.
But I dont want to pull hard if its going to break..
It feels like its molded or something to the pillar.
iii) All the other trim in the car: This is all held in with metal clips... when in doubt, pull! It'll come out eventually.
How much "pull" does it take?
Does it even come out?
I have a 98 Cavalier BTW
thanks...
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
anybody?
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Keep trying... it has metal clips, trust me.
Start at the top of the pillar and work down.
Ok thanks, thats what I wanted to hear. All the other panels came out easily, this one feels like its going to pull the whole pillar with it.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
i'm working on a pillar right now. molding a triple gauge pod to the factory pillar. here's a pic to give you an idea
don't be afraid to pull
GL
*MSR 190 wheels not shown in sig.
http://www.myspace.com/fpsunfire
5 seconds to find another street...
Thanks, I was was thinking about trying to fit a toggle switch inside there.. after seeing that I don't think it'll work how I wanted to do it.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
