hey guys
I was trying to get the console out of my 03 caavalier auto. I got the 4 bolts out easily, the onlything that was stopping me was the shift knob. Are there special tools to take this off?special techniques or whatever?any help would be appreciated!
there should be a little c-clip holding it in on the backside (towards the radio). its in a little hole or slot in the shift knob. get a small flat head screw driver and pry it out.
1997 Cavalier Z24 - 16.3 in 1320 and falling...
i think the manual knobs screw on ? (maybe) the auto has a clip in the front u just pull out with a flat head
the 95-99 has the clip. 00+ just twist off. it takes some effort but it does come off.
StrippedCav98 (Now Quotable) wrote:the 95-99 has the clip. 00+ just twist off. it takes some effort but it does come off.
twist off just like a nut on a bolt? I tried that i`m just afraid if i twist to hard im gunna bend the brackets underneath etc.ill go out and look for a clip like the other guys said but i`ll always try this again
My 2000 shifter knob has a clip on it and so did the other 2000 console I just removed and sold, might want to check before you go pulling at it to be sure.
i have an 03 an i just pulled up and twisted... its like a blue plastic underneith the knob to hold the knob onto the stick.
http://www.jbodytuner.com
^^ The real jbody store!!!!!
on my 04 cav it was twist n pull but u cant put it back withou glueing it back on
well what i did
i cut my stick about 2 inches and then drilled out the blue thing just a little bit.. and i hammered it on with a mallet and its nice and tight around it..
http://www.jbodytuner.com
^^ The real jbody store!!!!!
um, he said he has an auto, I have an 03 auto and took mine out several times, THERE"S A CLIP! ftw
my bad..
http://www.jbodytuner.com
^^ The real jbody store!!!!!
theres a clip on all autos .. i would know haha 95-05 autos all have clips some just need to be twisted after you take the clip out.
