anyone have a picture or can explain the install process....i can figure out how to get the old one off, but the i didn't get install instructions...i'm kinda stumped as to what to do with some little black rubber piece with 6 little rubber things on one side and a metal ring that has an end for a connector...(guessing, but there's a black wire with a red end that i think it connects to...and why there's 6 small screws and 6 long screws for 6 holes? want to know how it all goes together....SOUNDS like a stupid question but want to know before i go DO something stupid, without the instructions, any help is appreciated.




"If you have no clue what's going on... STFU!"

anyone....? i haven't really found anything when i searched the boards about this



"If you have no clue what's going on... STFU!"

these are what i'm lost about....



"If you have no clue what's going on... STFU!"

http://www.j-body.org/forums/read.php?f=45&i=75405&t=75405#75405

See if that doesn't help.

thanks, lol i seen this, it still dont explain the 2 circle things........that where i went



"If you have no clue what's going on... STFU!"

That silver ring in the horn ring IIRC. You only use it if your wanting to keep the horn.

You have 2 sets of screws because of different thicknesses in the wheels and hubs. Makes sure you can get them tight. I'd go to Home Depot and replace them though. The ones I had all started to round off the first time I installed them. I take my wheel off a lot so it helps to not have round holes where an allen hole should be LOL.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

my horn is working on mine and i didnt use either of the cirlce things.


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography

I exploded my horn with an M80 so I dunno



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26