car is back and a little install - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
car is back and a little install
Thursday, February 08, 2007 6:50 AM
my car is back from getting the new engine in it. no pics its just a 2200.

but i finally got around to installing my chiristmas gift from my girlfriends parents.








Re: car is back and a little install
Thursday, February 08, 2007 6:59 AM
i thought real LS Sports had ECOTECs?


________________
WI-Jtuners member
Re: car is back and a little install
Thursday, February 08, 2007 7:09 AM
spork... nice mod man, i appreciate the little stuff like that. just make sure you tryn keep water away from the lenses the best you can. wade has the same ones on his car and they have quite a bit of moisture in them.




UFlip06 said it best: Just look underneath the engine and if you see big hairy balls it's a 2.4 Twin Cam, if they're shaved it's an Ecotec and if you see nothing it's a 2200!
Re: car is back and a little install
Thursday, February 08, 2007 7:18 AM
02 redbadged wrote:i thought real LS Sports had ECOTECs?


they do, but LS cavaliers had 2200's


looks good but..clean that car!!!!



Re: car is back and a little install
Thursday, February 08, 2007 7:29 AM
apc len's suck... they fall apart real fast....

Moisture means failing seals...



LE61T PTE6262 Powered

Re: car is back and a little install
Thursday, February 08, 2007 10:03 AM
sweet, cars should come with clear corners from the factory..



Re: car is back and a little install
Thursday, February 08, 2007 10:12 AM
dirty elf wrote:sweet, cars should come with clear corners from the factory..


That or black corners!

Clean her up now!!


Eh...old man with a Corvette now...it was bound to happen sooner rather than later right?
Re: car is back and a little install
Thursday, February 08, 2007 11:12 AM
yeah she needs a good wash. i am just waiting to pick up my strut bars, then i will start on the turbo set up



Re: car is back and a little install
Thursday, February 08, 2007 11:26 AM
if ur worried about moisture getting in them there is a fix, well atleast it works for the 95-99 clear corners.. drill a very small hold in the bottom of them and problem solved. i did this to mine and never had a problem with moisture, i had them on for almost 2 years on my old car without a problem and am putting em on my new z.. not sure if it'll work for thos lights tho but they worked for mine.


----------

http://diggininthecrates.tripod.com
Re: car is back and a little install
Thursday, February 08, 2007 11:26 AM
almost forgot, nice corners they really clean up the front up alot.


----------

http://diggininthecrates.tripod.com
Re: car is back and a little install
Thursday, February 08, 2007 4:54 PM
nice...that was my first mod...now just get rid of those orange bulbs (thats the point of the clear anyway right lol) and atleast get those silverstar corner lights that are blueish when not lit, and light up amber so they are legal..or just get clear bulbs. looks good!

Re: car is back and a little install
Thursday, February 08, 2007 6:09 PM
I have had those same ones for about 3 years now and never had a problem with moisture or anything falling apart, look good by the way.







Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search