just as the name says pic request - 03+ cavalier with quick release hub and after market steeringwheel

thx

I've got the momo hub and NRG quick release and a Sparco wheel, if I can find a charger for my camera I'll snap a few for ya.

I'd suggest you do some research on the issue with the 03-05 steering wheel splines/shaft diameter before you may end up disappointed.

^ i have a momo hub on my 04 with no problems



stock eco with 110 shot <<<<<<<<<WTF???

Cody@RDFabs.com wrote:I'd suggest you do some research on the issue with the 03-05 steering wheel splines/shaft diameter before you may end up disappointed.

Yeah I discovered this difference when I attempted putting my 01's steering wheel on the 04's tilt column.




---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!

I've had mine a little over 2 years and not a problem.

Well the issue is, somewhere in 2003 model year GM switched the shafts overall diameter making the momo hug adapter not fit. For some odd reason, there are a rare few 03's and the above 04 are somehow been really lucky. My 03 donor car had tilt steering and I wanted it in my 99, but i'm not running an airbag so i was quite disappointed when i found out my 03's had the larger diameter shaft.

Could it be the tilt steering column is different from the non tilt?


_____________________________________________
94 Honda Del Sol

^^maybe on the 03+

my 02 is a tilt wheel and i'm running the momo hub no problems.

my 05 tilt didn't work....so i swapped the column

05CaVaLiErBaRkIn3Rd wrote:I've got the momo hub and NRG quick release and a Sparco wheel, if I can find a charger for my camera I'll snap a few for ya.

almost exactly what ive been looking at just a momo steering wheel instead