I'm looking to hear some turbo cars to get an idea of what my car will sound like. If you can say what turbo/whp/BOV you are running that would be cool. I'm interested to hear some BOV's on our cars.

All I have is a few short exhaust rev vids, Ive always meant to take some driving vids but would always forget to take my camera with me lol. I can tell you though, Ive had a tial 50mm bov, a turboxs rfl, an hks ssqv, and will either be going with a a greddy type-s or back to a tial this week.

I'm pretty sure I'm gonna go with the tial wastegate and BOV, I just wanted to hear what was out there.

I have some vids i will post up. gt35, tial 44mm wastegate(open dump), tial 50mm bov

At the track, with 440 hp

http://s290.photobucket.com/albums/ll264/jmarks32/?action=view¤t=100_1174.flv

Dyno,

http://s290.photobucket.com/albums/ll264/jmarks32/?action=view¤t=100_1170.flv

Before tuning

http://s290.photobucket.com/albums/ll264/jmarks32/?action=view¤t=100_0991.flv

I have some better track vids that i need to get off the video camera.

T3/T4 57 Trim .63 a/r
2.5" mandrel exhaust and downpipe w/ open dump tial wastegate, tial bov, 28" resonator, dynomax super turbo muffler.

Highway Pull...
http://s224.photobucket.com/albums/dd60/z22cavrs-PERRY-/Bash%20Videos/?action=view¤t=M2U00024.flv

blow off valve...
http://s224.photobucket.com/albums/dd60/z22cavrs-PERRY-/Bash%20Videos/?action=view¤t=M2U00031.flv

Old setup

http://www.youtube.com/watch?v=ULuktFGFA68

New setup at the track. 303 whp, HKS BOV, 3" exhaust all the way back.

http://www.youtube.com/watch?v=AKIbu7EJvPw

http://www.youtube.com/watch?v=oaN5esk9y7k

Last years bash(first time racing it as a turbo car

http://www.youtube.com/watch?v=gDGsbcvBrnQ










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Ooops forgot to add, GT3071R, 44mm wastegate as well.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

most of you guys running open dump?

Yep










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Bunch Of My Old Car Here





LE61T PTE6262 Powered

here is my dyno/tune video. Its a basic garrett t3 48/57 trim with internal wastegate. 2 1/2 downpipe running 10 psi. TurboXS bov. Whp was 250 on 10 psi with a bad coil pack. I havent had a chance to get someone to retune it since fixing the ignition issue.

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vidmg.photobucket.com/albums/v686/Myzcar/Car%20Pics/HPIM0830.flv">



-- MyZcar

nevermind here is the Link...



-- MyZcar

The youtube video is very quiet, you will have to turn up the volume a lot to hear it.

yes, im on open dump

jmarks82 wrote:I have some vids i will post up. gt35, tial 44mm wastegate(open dump), tial 50mm bov

At the track, with 440 hp

http://s290.photobucket.com/albums/ll264/jmarks32/?action=view¤t=100_1174.flv

Dyno,

http://s290.photobucket.com/albums/ll264/jmarks32/?action=view¤t=100_1170.flv

Before tuning

http://s290.photobucket.com/albums/ll264/jmarks32/?action=view¤t=100_0991.flv

I have some better track vids that i need to get off the video camera.

a little off topic. but dang that s10 took off like a bat out of hell !

at least you admit it vincelol
the inside car is mine, garrett 60trim, tial wastgate, tial 50mm bov, 3 inch turboback exhaust
http://www.youtube.com/watch?v=WIrTP5HCy7c
http://www.youtube.com/watch?v=8vRAOd5RX4E


Edited 1 time(s). Last edited Monday, February 08, 2010 6:04 PM

Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Well my brother didn't really launch at the light either, but he still ran a 12.5 lol!!

Sweet vids guys...I'm getting pretty excited to get my car built, only a few more months till its running I was watching some of the vids from the GM tuner bash, looked like a pretty good turnout. Too bad there is nothing like that around here in canada.

Matt Gorman(ECOjunkkcurse) wrote:at least you admit it vincelol

admit what? open dump?



Edited 1 time(s). Last edited Monday, February 08, 2010 7:00 PM

Matthew Jollymore wrote:Sweet vids guys...I'm getting pretty excited to get my car built, only a few more months till its running I was watching some of the vids from the GM tuner bash, looked like a pretty good turnout. Too bad there is nothing like that around here in canada.

Yea man good time, other than the fact the air temp was 97 degrees and the track was hotter Everybodys time sucked, including mine.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

BuiltNBoosted wrote:

Matt Gorman(ECOjunkkcurse) wrote:at least you admit it vincelol

admit what? open dump?

yeah, it sounded funnier in my head


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

HKS SSQV BOV . T3/T04E 57 trim @ 10 psi 38mm Recirculated Tial Gate into downpipe. Thats why the spool sounds so good.

http://smg.photobucket.com/albums/v292/dragmyz24/?action=view¤t=MVI_0234-1.flv


Windy City TurboZ

WHITECAVY wrote:

Matthew Jollymore wrote:Sweet vids guys...I'm getting pretty excited to get my car built, only a few more months till its running I was watching some of the vids from the GM tuner bash, looked like a pretty good turnout. Too bad there is nothing like that around here in canada.

Yea man good time, other than the fact the air temp was 97 degrees and the track was hotter Everybodys time sucked, including mine.

Yeah we were running a full second slower and trapping 15 mph slower....