Hello all, a couple people wanted to hear my idle with the exhaust hooked up with the oldschool cams in. Its a little choppy and lots of vibrations but I kinda like it. Sounds a lot deeper in real life.

hahahahhaahaha



180hp in 1989 or 145hp in 2002, you decide. >

nice



8 psi with m62 and IAT under 100

I know its not an idle like a 226 or 224 cam but it seriously does shake the dash.

Not bad, was hoping for more lope. Ho cams right?










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

These are 87 2.3 cams. They have the same duration as the HOs but only .340/.350 lift. I was going for the midrange torque in this engine since it will eventually go into the DD vert. I actually have had all these parts laying around so its kind of a frankenmotor with stock bottom end. Now that the Z is running again after taking off the 086 head I can slowly start on its real engine.

Zs Z wrote:I know its not an idle like a 226 or 224 cam but it seriously does shake the dash.

add a few more degrees........


I like it. To bad I only have a tiny .370 exhaust cam in my 02 right now.


Edited 1 time(s). Last edited Wednesday, June 23, 2010 10:16 PM

sounds like if you would mate a pressure washer and a popcorn machine.

gmanz24 (The Bash Whore) wrote:sounds like if you would mate a pressure washer and a popcorn machine.

Haha I agree but it has a much better tone in person. I recorded this on my cellphone so the tone is waaaaay off.