how can you tell if B&M shift plus is working? - Newbies Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
how can you tell if B&M shift plus is working?
Thursday, March 17, 2005 7:38 PM
Just as the question asks, how can you tell if its working? I know this is a very newb question but I am just curious becaus ei have it installed i just don't know if its working right...when I accelerate all the way through 1st up to around 6400 its dropping back down to 4500 in stage one I have a 2.2 ecotec.

Re: how can you tell if B&M shift plus is working?
Thursday, March 17, 2005 8:57 PM
A friend of mine has the B&M shiftplus on his auto z24 and it shifts real hard through the gears, im sure you would notice if it was working.




Re: how can you tell if B&M shift plus is working?
Friday, March 18, 2005 7:09 AM
i dont know on a car but in my k5 blazer when it shifts it shifts right away and u will know because it jerks.



Re: how can you tell if B&M shift plus is working?
Friday, March 18, 2005 2:30 PM
You have to have the car off when u put it to the differnt stages...then turn the car on.



Re: how can you tell if B&M shift plus is working?
Friday, March 18, 2005 8:49 PM
you can turn it on with the car started, but you cant turn it off...... and you will know when its working..... big difference
Re: how can you tell if B&M shift plus is working?
Tuesday, March 22, 2005 3:55 PM
:-< damn 3spd... i cant use it



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search