ok, first im new to this forumbut anyways... i orderd a bltiz body kit (for the people who dont know what that is ... its a blitz front end, and drift sideskirts and rear bumper) and it should show up at my dads garage anytime now. if you know what type of suspension i should get for it it would great. thanx

Welcome to the Org. Kyle!

Just a quick suggestion that we ask of all members. Please fill out your registry car info. Also a lot of the questions that are commonly asked are in the sticky's at the top of each forum. When I first joined, I looked all the sticky's and found all the answers I needed. If searching doesn't help, then feel free to ask, and one of the 30,000 plus members will be glad to throw you an answer.

To answer your question, check the "suspension & brake" forum for your Cavi.

See ya around!

welcom to the org. Gravana coilovers: why you ask?! because there so friggin nautical!!
but in all seriousness there are alot of different setups you can get, most of which can be found under suspension & brake.

well w/ that kit you cant lower it too low because the kit itself is already low. when i had my drift kit the first suspension i had was skunk2 coils (not to bad but their not really made for our cars, spring rate is too high) with koni reds. not bad but w/ the coils raised all the way up, i could barely slide my foot under my front bumper. then i switched to air and been fine ever since. w/ that low of a kit, make sure you get quality struts or else your going to be bouncing all around and smacking your kit off the ground

i have some Tokico D-specs and Goldline lowering springs for sale if interested.

Welcome to the ORG




RIP Kasey Burleson, and get well soon Chris Shelly

sorry for me being a dumb one ... but how would i go about filling my car info out?

Not a dumb question at all. To fill out your car info. Log in (of course), go into control panel, then edit your car in the profile registry. The add some pics following the instructions.

Hope this gets you started.
Peace Out!

ok i filled it all up ... but i wish i could get ahold of some one who has it one with no suspention, but all i want for suspention is to level out the car i dont need to lower it alot , end of drive ways are really bad around here. it you guys could get me some info on how to just level it out or just lower it a smige it would be great.

a common choice is the eibach pro-kit... lowers it 1.4-1.5" all around. or if thats too much you could get suspension techniques lowering springs... 1.2" drop. theres not much available to just level it out. you may look into coilovers or bags where you can set your ride height.




Check out my build thread!

you can just level the car out, it does need to be lowered. the car is designed w/ rake and if you just lower the rear of the car its going to throw it all off. tein makes a lowering spring thats a 1.1" drop