I was wondering 3 things-
1- what does JDM mean?
2- How can you remove the front and rear bowites on the 03+ cavaliers
3- How do you reattach them?
Thanks! N00b for life, yo!
1971 camaro 427 --- here!
Stock... and loving every minute of it.
Quote:
1- what does JDM mean?
Japanesse Domestic market....i think
Quote:
2- How can you remove the front and rear bowites on the 03+ cavaliers
not sure on the front, but on the rear you can remove that piece that has the bow tie on it
Im a Xbox 360 fanboy...and damn proud of it!!
1) Japanese Domestic Market
2) 99redZ24 is correct about the rear... for the front, I too am not sure
3) The rear rebolts back on once you unbolt the reflector panel from the trunk lid. For the front, some epoxy should reattach it.
i thought it was japanese domain market? maybe im wrong...
on the front, you use a heat gun to get the bowtie hot then it should just pop right off. but like said above the only way to take the back one off is to take the whole reflector bar off and get different tails and the cf bezel, or a 95-02 trunk. or you can buy a cf bowtie and stick that over the one on the reflector bar.
Check out my build thread!
I remember reading a thread about this awhile back, search and look through old threads. I think fishing line and some soapy water should work though.
I thought it was Japanese Direct Manufacturer
Hey Newbies; Dont Search Ebay, i got what you need right here
sort results: alphabetical | rank
Search within these results
type in a single word (or portion of a word) you know is in the meaning
Rank Acronym Meaning
***** [directlink] JDM Japanese Domestic Market search Amazon.com
**** [directlink] JDM Juvenile Dermatomyositis (Childhood immune disease affecting skin and muscles) search Amazon.com
* [directlink] JDM Junior Department Manager search Amazon.com
* [directlink] JDM Jovi Deo Magno (Latin: To Jupiter the Great God, epigraphy) search Amazon.com
* [directlink] JDM Journal of Department Managers
Copy paste. I'm tired. you can read it.
jdm is japanese direct market
to remove the front emblem you take some fishing line and use a see-saw motion behind it to work your way through the glue. once you get all the way through, you can simply pull of the emblem and what i did was just use my thumb to get the rest of the glue off or you can be a girl about it and use goo-gone either way works fine
as for the rear, you would have to take that reflector piece off which if you do, you will either need the carbon fiber filler piece or a 95-02 trunk lid since the 03-05 have holes in them from where the reflector goes
EliteCavy wrote:the only way to take the back one off is to take the whole reflector bar off and get different tails and the cf bezel, or a 95-02 trunk. or you can buy a cf bowtie and stick that over the one on the reflector bar.
What was that again? I like this look, how do ya do it?
1971 camaro 427 --- here!
Stock... and loving every minute of it.
that piece on your trunk, you know the one that has the bowtie around the key hole.....pop the trunk, and unscrew that. then you have to do something about the holes that will left there in place
Im a Xbox 360 fanboy...and damn proud of it!!
JDM = Japanese Domestic Market.
well then i think you are out of luck.
Im a Xbox 360 fanboy...and damn proud of it!!
i beleave a heat gun should be able to take that badge off the rear im pretty sure its just on with that adhesive tape, once you get it off i want it. pm me, let me know what youd want for it
i always thought that was one whole piece. could be wrong though
Im a Xbox 360 fanboy...and damn proud of it!!
JDM = Japanese Drift Magazine
.
JDM =jiggly ducehce monkeys
"
boobs now with Riboflabin"
wow this fourm is a joke.
Japanese domestic market is correct.
something that is JDM is somethign that is found or sold in japan. like when people with 3rd gen integras put the JDM front ends on. not 94 but 95+ integras came with those front ends that look like accords. theyre imported from scrapped integras in japan. JDM engine. theyre engine was imported from japan. jdm vtec integra motors have more HP
USDM= united states domestic market
Working on obtainting an M-Class license... ?? Hint: 2 wheels.
AND NO, the back plastic thing is one piece.
Working on obtainting an M-Class license... ?? Hint: 2 wheels.
TORONTO CAVALIER wrote:wow this fourm is a joke.
Japanese domestic market is correct.
something that is JDM is somethign that is found or sold in japan. like when people with 3rd gen integras put the JDM front ends on. not 94 but 95+ integras came with those front ends that look like accords. theyre imported from scrapped integras in japan. JDM engine. theyre engine was imported from japan. jdm vtec integra motors have more HP
USDM= united states domestic market
holy @!#$ you mean those parts really come from japan?
^^^
____________________________________________________________________
Madjack wrote:Like I said before, building an engine like ours (2.2 or 2200) is a painstaking chore , since there is so few custom made parts. It's frustrating to me too, but that's what I like about doing this engine, it's the challenge.
TORONTO CAVALIER wrote:wow this fourm is a joke.
Japanese domestic market is correct.
something that is JDM is somethign that is found or sold in japan. like when people with 3rd gen integras put the JDM front ends on. not 94 but 95+ integras came with those front ends that look like accords. theyre imported from scrapped integras in japan. JDM engine. theyre engine was imported from japan. jdm vtec integra motors have more HP
USDM= united states domestic market
thank you mr obvious
Im a Xbox 360 fanboy...and damn proud of it!!
I'll try the fishing line on the back bowtie and see if it comes off. Look at the pic I posted, the bowtie is gone and NOT the whole piece. Maby in the summer...
1971 camaro 427 --- here!
Stock... and loving every minute of it.
