hey i feel kinda dumb asking this but i just got a short ram air for my 2.2 1995 cavalier an i took the old factory box an stuff out now i have the new intake on and 1 lil problem it has 2 small tubes coming out of the intake i know 1 is to hook up to the sensor on the valve cover but what's the other 1 for?
if I'm not mistaken it is a breather hose....trace it to the engine, you can put a small filter on it, which can be found at almost any auto parts store
Go Premium, it builds character!
Yes, it is the breather hose. You can either put a small filter on it as has been stated, or just run a hose. The other end of the hose attaches somewhere along the right side of your engine, a few inches down from the valve cover. If you still need some help I can post a pic of mine when I get home.
I ran the first one to the PCV on the valve cover, that's what it's for. The other I removed the fitting, drilled it out, and installed the IAT sensor. Note the wires for the sensor.
