Tryed installing a remote start, got frustrated took it out, when I had it in I hooked power wire up and driverside doorlock actuator went on and off but didn't actually move knob on door. now with everything removed the door lock only works manually, i even replaced the actuator any ideas?????


2004 Chevy Cavalier LS sport
4dr

Power Lock lt. blue + BCM, purple plug, pin A4 (CHEVROLET, CAVALIER, 2004, Power Lock
The BCM is above the driver kick panel.
On vehicles without keyless entry, the door lock wires are just located in either kick panel. They are 5wi (Type C), and mastered from the passenger door lock switch.)

Power Unlock white + BCM, purple plug, pin A3 ((CHEVROLET, CAVALIER, 2004, Power Lock
The BCM is above the driver kick panel.
On vehicles without keyless entry, the door lock wires are just located in either kick panel. They are 5wi (Type C), and mastered from the passenger door lock switch.)

Lock Motor gray 5wi driver kick or door lock relay (The door lock relay is above the passenger kick panel.)

Unlock Motor tan 5wi BCM, purple plug, pin A6 (The BCM is above the driver kick panel.)

5wi basiclly means your door locks have a 5 wire set up so in order to get you doors to lock and unlock youll need to set up a relay

i hope this info helps if not let me know what type of rem start unit do you have and ill try to give you more specific instructions.