So I thought I'd start by introducing myself here. I have a 97 white Sunfire GT. I bought it from a co-worker who ran it out of oil and spun a rod bearing for $200. body and interior are in good shape. I just spent the last 3 weeks collecting parts and last weekend was finally able to put the motor back together and get the car back on the road. I'm primarily using this car as a daily driver right now but it might get some mods later. anyways links to the rebuild process below:

www.changstromco.com/Gallery/v/Sunfire

I should add that I completely rebuilt the motor. parts and machine work are below:

new crankshaft
machined all rods
block was line bored
I hoed the block
lapped the valves
everything was completely cleaned
cheapo ceramic coats on the block, head,exhaust manifold, and cam covers.
new rings
new bearings
new valve seals
new timing set
new water outlet housing
new O2 sensors
new clutch

from here it's just the usual:
trans fluid flush, oil changes, spark plugs, boots, coolant, etc
long CAI
an a few other goodies.

All together I spent $830.