Hello, I just got some clear bumper lights and I'm wondering how I put them in? Thank you!
On what!????? you have no car listed in your profile........and didnt let us know in your post either.
"Straight roads are for fast cars, turns are for fast drivers"-Colin McRae
Sorry, it's a 96 cavalier base
Perfect. Id sugest you jack up the car, but if your not lowered you may be able to reach under the front bumper without it. When you get under the front you should be able to see the twist in style bulb sockets. Remove those, all thats left is two bolts on each side of the bulb socket holding the bumper light. Remove those and the lights should pull out from the front with no trouble. Reverse for install. Make sure to check that your lights are working correctly afterwards.
"Straight roads are for fast cars, turns are for fast drivers"-Colin McRae
eh.. easier if he just pulled the headlights off... he then can just reach in from there... alot easier IMO. once you get your headlights out the way, reach below the bumper light feel for the little tab. push the tab in while rotating the light socket. then use a socket to undo the 3 quick nuts. jacking up the car, then un screwing all the screws for the fender liner just so you can reach up the bump.
er, seems to be alot more work then needed.
ouch wonder where that went lol
