KYB AGX settings for 1/4 mile drag? - Racing Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
KYB AGX settings for 1/4 mile drag?
Monday, September 11, 2006 12:49 PM
Ok im running KYB AGX struts with the Eibach pro kit. Should I have the struts set for a tight suspension or a soft suspension for the drag strip. Im going to be running a set of drag radials and hopefully break into the 13's at 9-10 lbs of boost.




Re: KYB AGX settings for 1/4 mile drag?
Monday, September 11, 2006 12:58 PM
3f/8r











Re: KYB AGX settings for 1/4 mile drag?
Monday, September 11, 2006 3:29 PM
i was always told hard in the rear and soft in front.
but i would suggest you go to a test and tune and play with the suspension a bit



Im a Xbox 360 fanboy...and damn proud of it!!
Re: KYB AGX settings for 1/4 mile drag?
Monday, September 18, 2006 2:26 PM
1 or 2 in the front 7 or 8 in the rear.
It has helped to my 60ft times.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: KYB AGX settings for 1/4 mile drag?
Monday, September 18, 2006 4:23 PM
rear as hard as possible, your car is FWD, when it squats back on hard acceleration your taking weight off the drive wheels and losing traction. Make the rear as stiff as possible so it will not squat and keep the front end planted firm. As for the fronts, somewhere near the middle shoudl be alright, maybe a little softer then 1/2 but you get the idea



Re: KYB AGX settings for 1/4 mile drag?
Friday, September 22, 2006 10:57 AM
i do 2/8 or 3/8... depends on track surface, temp, etc... how im driving. All of that. Just do a couple runs and adjust it. Definatly stiff in the rear thought o keep it from squating.


-----------------------------------------------------

98' Pontiac Sunfire SE

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search