can i take the roller rockers off of a 98 2.2 and put them on my 96 2.2?
the 98 didn't come factory with roller rockers.if you found one that has them, then someone installed them. you would need different studs for the rocker arm mount.
JBO Stickers! Get yours today!
Rich Grayo Jr. wrote:the 98 didn't come factory with roller rockers.if you found one that has them, then someone installed them. you would need different studs for the rocker arm mount.
Yes, it did. 98+ rockers have a roller fulcrum (more important than roller tip).
However, they are not adjustable, and the mounting thread is different on 97- heads, so no, they won't swap.
fortune cookie say: better a delay than a disaster
You can use a set of studs for a 4.3 V6 and put a set of full roller narrow body rockers on it. I have found that a 1.6 to 1 set off of a ls1 work well. You just need to order the correct poly locks. P.S. you will have to clearance the valve cover.
