Steel Wheels for circle track racing - Racing Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Steel Wheels for circle track racing
Sunday, May 06, 2012 10:47 AM
Running an '02 Cav in UCAR circle track racing... have to run 14" oem steel wheel, currently on a 6" wide wheel. Curious if there are any 6.5 to 7" wide steel wheels that would fit the Cav?

Broke the center out of a wheel racing this weekend, so thinking I'd try to upgrade the replacement.

Thanks in advance...

Keith

Re: Steel Wheels for circle track racing
Sunday, May 06, 2012 4:49 PM
Guy at our track said the neon wheels are thicker and stronger.
Re: Steel Wheels for circle track racing
Sunday, May 06, 2012 5:53 PM
yes they are thats what i run on my sunfire
Re: Steel Wheels for circle track racing
Sunday, May 06, 2012 5:54 PM
yes they are thats what i run on my sunfire dodge neon wheels
Re: Steel Wheels for circle track racing
Monday, May 07, 2012 5:24 PM
Thanks, think I'll check into it... can't have catastrophic failures like that very often! Would really love to find some 7 inch wide wheels for sure.

Appreciate the info,
Keith
Re: Steel Wheels for circle track racing
Thursday, May 17, 2012 12:49 AM
Older Caravans also have the thicker 14 wheel, thats what I used to run. not sure how wide they are
Re: Steel Wheels for circle track racing
Sunday, May 20, 2012 7:25 PM
If you can run aftermarket wheels, both mrw and basset make a great set of wheels that will not blow out in the center,
Re: Steel Wheels for circle track racing
Tuesday, July 03, 2012 10:55 PM
cost on them aftermarket?


97cavalier
Re: Steel Wheels for circle track racing
Thursday, September 20, 2012 7:05 AM
I would try running aluminum wheels. I know it sounds stupid but I've broke the center out of 3 steel wheels and since I went to a aluminum I haven't had a problem
Re: Steel Wheels for circle track racing
Thursday, September 20, 2012 9:56 AM
i'd recommend an aluminum wheel as well... from my rallyx days, i've seen too many guys actually have lug nuts pull through the steel wheels. they aren't made to handle the kind of forces dirt tracks can exert on them.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search