I went to Atco Raceway last night to make a few passes. It was the first time running my z24 but not the first time for me racing. Mods are as follows- my custom CAI (an actual CAI & not a WAI lol) Tuned by me with HP Tuners, poly engine and trans mounts. Spare and jack removed and 1/4 tank of gas. Regular old 16" street tires.
1st pass 15.65 @ 87mph 2.49 60' (one wheel peel action)
2nd pass 15.25@89.17mph 2.23 60' (bogged a lil)
3rd pass 15.25@88mph 2.18 60' (bogged a lil more)
I have slips and video that I can post up later tonight. My header,cutout and short throw came in yesterday so I should have them installed today after work :]
2000 Cavalier Z24 5spd CRM
Eibach Anti Roll kit, Poly motor/trans mounts, custom made CAI, Header, cutout, tuned by me with HPtuners
14.81 @ 91.09 mph 2.06 60'
97 Saturn SC1 with DOHC swap. 13.7@98mph on motor. +75 shot 12.8 @107mph
Lower those 60ft times and you may hit 14s. I used to trap 90-93 and I was in the 14s with 1.9-2.0 60ft times . But good job
I hear you there. I was doing the math on my 60' times lol. I installed my header last night and will be installing my cutout on saturday perhaps. Then I'll log some pulls and retune as needed. I'm pretty sure the header/cutout will get me into the high 14's. I might order some 225 50 15 Hoosier drag radials before the end of the season as well
2000 Cavalier Z24 5spd CRM
Eibach Anti Roll kit, Poly motor/trans mounts, custom made CAI, Header, cutout, tuned by me with HPtuners
14.81 @ 91.09 mph 2.06 60'
97 Saturn SC1 with DOHC swap. 13.7@98mph on motor. +75 shot 12.8 @107mph
Very nice times.
What were you launching at?
60 foot times are impressive on street tires.
FU Tuning
Addicted to meth wrote:Very nice times.
What were you launching at?
60 foot times are impressive on street tires.
Thank you
expecting it to be a one-wheel wonder again, I launched it at 3000 rpm, giving the clutch a quick slip. but it hooked good and bogged lol
I don't have my 15.25@89mph pass on video, but I have the 15.25@ 88.75mph 2.18 60' pass on video (below). launching around 3000-3500rpm, It chirped the tires a lil bit and bogged. I'd like to get one of those inserts for the diff and see how it does after that. I recently installed a header and an electric cutout, so I want to go back on a night with similar weather and see what it gained me.
http://www.youtube.com/watch?v=jWZwKugdJdg&feature=youtu.be
2000 Cavalier Z24 5spd CRM
Eibach Anti Roll kit, Poly motor/trans mounts, custom made CAI, Header, cutout, tuned by me with HPtuners
14.81 @ 91.09 mph 2.06 60'
97 Saturn SC1 with DOHC swap. 13.7@98mph on motor. +75 shot 12.8 @107mph
