carnage thread - Jacked / Wrecked / Sold Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
carnage thread
Friday, January 27, 2012 2:07 AM
with all the other "lets see" thread posts im always down to see some carnage so lets see all the carnage wrecks and all




Re: carnage thread
Friday, January 27, 2012 2:46 AM
there is a while forum for those pictures. its call jacked/wrecked/sold. If you want carnage pics look thru there.



Re: carnage thread
Friday, January 27, 2012 3:01 AM
http://www.j-body.org/forums/list.php?f=59


2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
Re: carnage thread
Friday, January 27, 2012 7:13 AM
I"m down for starting a thread for this, doesn't have to bee just jacked, wrecked, or sold. Just a thread where one sentance is put up with the pic no great details so it doesn't get clogged up with the life story behind said broken part.....bent rods, holes through blocks, etc, etc. Once I'm done running around I'll put my stuff up.






Edited 1 time(s). Last edited Friday, January 27, 2012 7:35 AM



Re: carnage thread
Saturday, January 28, 2012 1:36 PM
An 02 ECO that let go from to much Nawwwws









This is from when a JBO member dropped his cell phone and found it with the lawn mower



A JBO member was driving this when it took an RPG to the front end (after minor injuries he's fine)



And this is from when Hypsy towed his car to me after he installed cams, he forgot to tighten one of the cam gears past finger tight. When he started it up the key ways sheered off the gear the cam stopped and pistons smashed valves. He had me put a head on it.









That's all the JBO related carnage I got



Re: carnage thread
Sunday, January 29, 2012 8:48 AM
Nice post Ryan. I can't find my nitrous pics from when my LN2 took a crap, this is all I got.


Bent passenger lca and rim from a few weeks ago.





Camber plates



Our old 383 s-10, welds broke on the oil pan windage tray, took out the oil pump, then then bent a rod. Then at the track after fixing the motor the drive shaft became a pretzel about half way down the 1/4.













Re: carnage thread
Sunday, January 29, 2012 2:41 PM
My first block had a freak accident. After over a year of boost it gave out cruising down the highway under almost zero load. Wrist pin seized, bending the rod to the max before shattering it. Put two holes in the block and one in the oil pan.







You can see the bend in whats left of the rod




Part of my block "gm"



My second Cav I only had for a short while. It got a broken face in a 3 car accident due to an icey bridge. I was last to hit. Insurance fixed it and i later sold it to a friend... Where a cop hit him and totaled it.












Re: carnage thread
Sunday, January 29, 2012 3:02 PM
Spec / fidanza flywheel letting go of the crank while accelerating into traffic.





PSN ID: Phatchance249

Re: carnage thread
Sunday, February 05, 2012 3:01 AM
Finally! Relevant Username!




.
.

Re: carnage thread
Sunday, February 05, 2012 12:10 PM
Darn deer. Girlfriend hit one with the Fire. Only one she ever hit.








Re: carnage thread
Sunday, February 05, 2012 12:18 PM
Result of people not knowing how to drive in Illinois winters and sliding into my side of the road. Totaled it.



Dave





Re: carnage thread
Sunday, February 05, 2012 1:52 PM
I broke quite a bit of stuff in hind sight...

Ground up diff teeth...


Chipped reverse teeth...


Cracked counter shaft bearing race...


Frayed shifter cable end...


Twisted/shattered intermediate shaft end...


Broken mounting bosses on a block...


And a burned up head gasket...






13.934 @ 97.82 ALL MOTOR
Re: carnage thread
Sunday, February 05, 2012 5:29 PM
My first j-body.



Then it got violated by a mazda 3 while I was sitting at a stop.






Re: carnage thread
Sunday, February 05, 2012 7:42 PM
My blown up trans pieces This is what it should look like This is what the old one looked like My rotor after my wheel fell off at 40 mph



Re: carnage thread
Sunday, February 05, 2012 8:11 PM
Dam Tony that diff pin is fubar.








Re: carnage thread
Sunday, February 05, 2012 8:34 PM
Ya that was from the trans that blew apart. Im just glad the pin on the replacement trans looked like new.



Re: carnage thread
Monday, February 06, 2012 6:58 AM
Darkstars wrote:That's all the JBO related carnage I got


Some where you had a picture of my fender from the deer. I know I don't have it anymore.




Re: carnage thread
Monday, February 06, 2012 8:15 AM
Skunk's oil pump.
L61...









PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: carnage thread
Monday, February 06, 2012 9:54 AM
WOW!! ^^
Re: carnage thread
Monday, February 06, 2012 1:32 PM
before



after







now
all the fun stuff on the wifes vert or my brothers 98 3500 swapped z

right after install


and what i replaced my Z with... another Z



for the record all deer should die a painful death.



Edited 1 time(s). Last edited Monday, February 06, 2012 1:32 PM


Re: carnage thread
Monday, February 06, 2012 3:19 PM
Carnage:

Before:



After:



lol




Re: carnage thread
Monday, February 06, 2012 7:06 PM










and cause im sick.....








SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Re: carnage thread
Monday, February 06, 2012 7:17 PM
what the f is up with your hand??





Re: carnage thread
Monday, February 06, 2012 7:23 PM
My cousins car left this in the middle of Markham rd.


Hole #1

Hole #2

Hole #3

Destroyed oil pan.

You can see right through the engine block here.

Prybar right through it! lol

Some internals that are now externals.


We dont @!#$ around in my family! lol



Re: carnage thread
Friday, February 10, 2012 11:29 PM
Printing press accident 5 years ago. Lesson learned, don't put hand in press.

I'll have some more pics, trans diff pics, and a couple other car related pics up soon.



SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search