Ok so i'm in the middle of doing a 5spd swap. i bought a computer from a guy that had a 96 2.4L cavalier and it came in today. my thing is though is it has 3 smaller plugs and my auto pcm has 2 long ones, do i have the wrong computer or do i have to wire it all up?
www.rdracing.110mb.com
I have the plugs... how hard is it to repin the harness?
www.rdracing.110mb.com
its easier to get a 97+ PCM
sig not found
ok so i work at autozone and can get a stock ecu for a 5 spd for about 100 bucks..... how will my car run if i run this stock computer with my mods?
www.rdracing.110mb.com
is your current auto computer tuned for your mods?
yeah it is
www.rdracing.110mb.com
then just retune it to shut off the auto trans stuff
sig not found
the problem is that i dont have the tuning software... i had shifted do it for me last time
www.rdracing.110mb.com
so any help?
www.rdracing.110mb.com
I think the ECU's that you get from the dealer and AZ (dealer for sure) are not flashed, they are blank computers, so HPT can't write the first tune to it. I did say that I could retune your new computer with your old parameters, but unless your car is a 2002 (year I have unlimited licenses for), then it will cost more credits.
Your car will run with the stock computer, your tune isn't so dialed in that it won't run if it doesn't (hard to do something like that through the mail). It will run better with the tune, but it will run without it.
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
i can get the computer through autozone flashed... they do it through your vin number so what i'll do is just find the vin from a 97 cavy thats just like my car but a manual.... then later down the road i'll send the computer to you and have it tuned.
www.rdracing.110mb.com
