Will HP tuners work with this setup? - Tuning Forum - j-body.org

Will HP tuners work with this setup? - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.

Will HP tuners work with this setup?

Saturday, September 09, 2006 9:06 PM

I am running a 2.4 twin cam with a P&P head, HO cams (no cam sensor), gm s/c and some other minor things. I currently have an MS-2 setup, but I cant get a tach signal. I am getting frustrated with it. Any help would greatly appriciated.

Re: Will HP tuners work with this setup?

Saturday, September 09, 2006 9:14 PM

Shifted

The ECU needs a cam signal to work otherwise it'll throw codes, but otherwise I don't see why it wouldn't work.

4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Will HP tuners work with this setup?

Sunday, September 10, 2006 7:09 AM

02z24sc

It has thrown a code already for no cam sensor. Is there a way to eliminate the cam sensor and convert over to a multiport setup in HP tuners?

I swear, as loud as you are, you should be doing at least 200 mph.

Re: Will HP tuners work with this setup?

Sunday, September 10, 2006 7:15 AM

Shifted

No, HPT uses the stock ecu and adjusts values in that, it isn't a standalone like the MS or AEM units.

4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Will HP tuners work with this setup?

Sunday, September 10, 2006 1:10 PM

02z24sc

So unless I can find a way to get my cam sensor back working, I am going to have to use a stand alone. Anyone on here use MS-2?

Forum Post / Reply
You must log in before you can post or reply to messages.

Start New Topic Advanced Search