covering wires with lambo doors - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
covering wires with lambo doors
Wednesday, July 06, 2005 10:27 AM
as the title states, what did everyone with the lambos use to cover their speaker/power window wires with. I used the stock rubber things but those are about to rip apart. I bought some plastic wire grommets from autozone, but they kept getting crushed behind the door and crinkle up. So, is there any other alternative for this problem?

Re: covering wires with lambo doors
Wednesday, July 06, 2005 10:29 AM
My bad if this is the wrong forum
Re: covering wires with lambo doors
Wednesday, July 06, 2005 10:36 AM
I just taped all the wires together have not had a problem with them at all



http://www.aplusperformance.com
http://www.modified-motorsports.com
Re: covering wires with lambo doors
Wednesday, July 06, 2005 11:14 AM
yea i used the wire loom stuff to and mines getting crushed between the fender and the door i dunno what to do as well.
Re: covering wires with lambo doors
Wednesday, July 06, 2005 11:20 AM
wrap the wires in electrical tape.




Re: covering wires with lambo doors
Wednesday, July 06, 2005 12:23 PM
electrical tape, and then kinda bend it so they shut without pinching there.



http://www.aplusperformance.com
http://www.modified-motorsports.com
Re: covering wires with lambo doors
Wednesday, July 06, 2005 1:12 PM
I used black wire loom.



Re: covering wires with lambo doors
Wednesday, July 06, 2005 2:51 PM
i used black wire loom and tape. if it is getting caught in the door and fender, you need to shorten them. you only need them long enough to reach when the door is up. i had that problem too, and i just shortened the wires. works great now. good luck.



-Www.IznTrbl.Com-
Re: covering wires with lambo doors
Wednesday, July 06, 2005 3:57 PM
i didnt have to extend my wires at all.. i feel very lucky i just pulled them a little bit and they reached fine i havent had a problem since




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search