Just wondering if anybody knew of one for the 03+ model Cavaliers. I know they got them for like 99 models. Saw it in our Arrow Speed Catalog at work.
I want one for my car so I was curious.
I believe the 95-02 trunk lids are the same as the 03-05 ones
Thanks
Shaun
www.ShowStopperTuning.com
Im with him and i do have them so check us out! click the sig, let me know if you have anymore questions!
Who needs a sig?
www.sinisterimages.com
same trunk lid, just need 95-02 tails. i just picked one up
Eazy Ent. ( 716 ) wrote:same trunk lid, just need 95-02 tails. i just picked one up
ehhhh... you know for sure? you put an 02 CF Trunk on your 03-05?
i'm actually planning on shaving off most of the lights anyway, have 2 round lights similar to the Cobalts. Instead of having the standard Cavy looking tails. I saw a picture of some once, but I can't find the picture.
anyways, thanks for the info and get back at me on a for certain. pictures would be good.
thanks!
^^^^yes they are the same I have 02 trunk on my 03. the only difference in the two is where the trunk reflectoris on the 03's it has a couple of holes.
i have a 95-02 VIS CF trunk on my 04 cav too
does any one make a 03 carbonfiber trunk.. i happen to like my lights...
I popped on an 95-02 normal trunk on my 05, so I would assume the CF trunks are no different.
yes you just have to order the one for the 03-05 cav insted of the 95-02
or you could just knock the all the mounting points off the reflector except the couple on the outside edge where the normal inners would mount.
I'll work something out. Thanks for all the info!
okay i went out to try to get my lock out of my old trunk and i took the clip off now how do i get the black cable off so i can take the lock out
thanks james
okay now the tail light inters wont fir in the trunk the holes are too small.Can i just drill it out?i dont no if it will hurt the CF.man i thought this vis trunk there wasnt going to be anything to mess with
thanks james
why not just put all these question in your thread instead of jacking a thread and making a new one?
yes if the holes are too small, get a slightly bigger bit and drill it til the tails fit
you should of searched before you bought the lid. this is 1 of the reasons i dont have a cf lid. also wait til you get it on. its not gonna line up right and your gonna have to do some work to get it to line up and not leak water
exactly why I only want to buy parts that are made to fit my car...
because there are some small differences in the 03-05 body styles.
^^^not with the trunk (except the extra holes)
-Brandon
james wrote:okay i went out to try to get my lock out of my old trunk and i took the clip off now how do i get the black cable off so i can take the lock out
thanks james
I just did this today actually.. you need to squeeze that orange thing together and push it towards the lock so you can pull the black cable piece off. then the lock comes right out. I don't know if that sounds confusing or not but i tried heh.
Thanks
Shaun
www.ShowStopperTuning.com
