bought my rear lip and the guy i bought it from cut off all the tabs that go through the bumper anyone got any suggestions on how to mount it


h&rs-rksport-magnaflow-ebc-stoptech-vss-jlaudio-jvc

Glue then mold it be cuz u needed those tabs

wat kind of glue should i use


h&rs-rksport-magnaflow-ebc-stoptech-vss-jlaudio-jvc

hold on ...


-Brandon

here is how I did it on my 03...

I just made a lot of these brackets and just screwd them in.


-Brandon

what are the measurments on those?


h&rs-rksport-magnaflow-ebc-stoptech-vss-jlaudio-jvc

buddy from CO actually used the tape on the back of emblems to stick the two together, has stuck for quite a while now

Ya you can use a tape that 3M makes its call VHB tape, they use it for alot of stuff. VHB as in very high bond. It won't come off.

Isn't that basically the stuff body kits get mounted with sometimes?

Can you see the screw head's from underneith? Standing by it or away from it?

redecocav wrote:here is how I did it on my 03...

I just made a lot of these brackets and just screwd them in.

http://www.j-body.org/forums/read.php?f=7&i=311163&t=311163

so did you get measurments on your brackets i made some but their hella ghetto lol



for some reason it looks cruked in pics but it lines up with a ruler?


h&rs-rksport-magnaflow-ebc-stoptech-vss-jlaudio-jvc

TJ2 wrote:Can you see the screw head's from underneith? Standing by it or away from it?

redecocav wrote:here is how I did it on my 03...

I just made a lot of these brackets and just screwd them in.

huh????


-Brandon

hes asking if you can see the screw on the bottom of the lip if you stand back away from it

no


-Brandon

Low_4_Show_03_eco wrote:so did you get measurments on your brackets i made some but their hella ghetto lol



for some reason it looks cruked in pics but it lines up with a ruler?

why is there such a hige gap there for the exhaust exit?