Hey guys i have a carbon trunk and i cant seem to get it to fit right. It leaks everytime it rains, and thats obviously not a good thing. Anyone else have this problem? and how did u fix it? Thanks
all cf trunks ive seen stick up in the corner. the only idea i would have is when you open your trunk, there is that lip on the inside that has the foam strip along it. you can tap that up w/ a hammer and bring it closer to the lid
the best way to do it, is to loosen all 4 bolts on the lid, and the latch ones, take the tension rods out, and close it to fit how you want. then retighten all bolts while it is closed to your liking. worked for me and another friend of mine
no leaks, no fitment issues
RIP Saint ........ JBO
^^ basically what i did..
just sat the trunk on the arms and closed it.
use some thick green tape to hold it down and sat a couple big books on it(i put rags under em just in case also) cuz i didnt remove the tension bars.
then used wooden stir sticks and got it gaped on the sides how i wanted and have it all position where i wanted..
then climbed inside and got in the trunk and took the bolts and just bolted it in as tight as possible where it wouldnt move any.
removed everything off it and opened it and checked to make sure all the bolts were tight enough.
Then installed the latch..
i actually thought bought pushing the latch on where it latches on the car then lowering the trunk to it and bolting it on in the inside cuz then i woulda known it was already lined up but i didnt think it would be to difficult cuz it lined up right the first time..
Also i beleive to avoid the trunk from sitting to high is u need to get a smaller weather stripping.. contact GlassClassPerformance and theyll sell u one.
Thanks for the help guys. Took me about 20 minutes doing what you told me to and its 99% better. Not perfect though. Thanks agian!
mine dosnt line up.so dose taking the tension rods out for good help it line up and how dose the trunk open without them
thnaks james
no without the trunk arms ull need to lift it up on ur own and use something to hold it up..
ok so where did u guysa find cf trunks at cause i really think ive looked everywhere
jsp or vis. you can contact jason at aplusperformance and he can get u one
goto jspamerica.com
Dale will get u the best price
RIP Saint ........ JBO
I got mine at summit racing for a really good price. $395.00 plus shipping...its a jsp. VIS doesnt make them anymore. Because VIS was my first choice and when i called them directly they said they were discontinued.
yeah i called jsp and they only have it for 95-02 and i have a 04 so yaeh it kinda sux for me