ok, here's my problem: I took off trim piece on my '03 Sunfire's passenger side and it snapped. I tried Super Glue Epoxy Adhesive, VersaChem 60 sec. epoxy, Perma Poxy 5 min. Plastic Weld, ABS glue, Gorilla glue, nothing seemed to hold this piece of ...car together. Gorilla glue was holding it for like a week and then it became fragile and cracked. I took off same trim piece off another Sunfire (purple), but, unfortunatelly it cracked and little piece broke off. I'm looking for something I could sand, primer/paint.
Any ideas?
ThnX!
P.S. I don't wanna pay over $200 for that at dealership.
<a href="http://putfile.com/pic.php?pic=main/8/22303194223.jpg&s=f10" target="_blank"><img src="http://f10.putfile.com/thumb/8/22303194223.jpg" alt="Click to enlarge."></a><a href="http://putfile.com/pic.php?pic=main/8/22303194223.jpg&s=f10" target="_blank"><img src="http://f10.putfile.com/thumb/8/22303194223.jpg" alt="Click to enlarge."></a>click here to view pic
crap, this pic/link/URL feature doesn't seem to work. Anyway, I think you should be able to find it on Putfile.com with THAT many of URL's
ThnX again
another try to put this darn pic here
my sig
I'm new to posting piX, so take all of the above as one whole post.
ThnX!
well since u have it off the car u can work on it better, if u want a permenant fix u would want to use 3M Automix for flexible parts im sure, but u will need to sand paint and primer off and apply this and sand down the excess and repaint..
there are plenty fo cheap small ways to connect it but if u want a permenant fix use that stuff i mentioned.
i dunno if ur having a problem putting that panel back on but i think Shifted should be able to tell u what to use to put the panel back on.
ThnX Manta Z(The Primered One) for the advice.
I just put SEM 68432 general pupose adhesive and it seems to do the trick; I'm gonna wait on it for few days and see what happens. Anybody used this stuff (SEM gpa) before?
