Hey there; just wondering if ya could tell me how to remove the fuel door; i tried with a hammer and a nail trying to get the pin out; not sure if i bang on the bottom part of the pin or top part of the pin, and it seems like its doing nothing
any help would be appreciated
thanks
terry .
98 j-body sedan
lol. yea, that's what i used.
i also used plyers when the nail went as far as it could go.
oh, also some WD40 too, or something along those lines.
good luck buddy!!!!!!
-Www.IznTrbl.Com-
huh? mine was held on with 2 small bolts ( or maybe screws, i forget) from behind the rear 1/4.
Yeah i have a cf fuel door to install; trying to take my oem one off and with a hammer and nail; well i have a little file; but i have been banging and banging on that pin and its not budging; so maby i have to jack up my car and remove the bolts and take the door off that way; wih the hinge would be attached to the fuel door, so i would still have to take the hinge off the oem door and install it on the cf door; oh man for something so simple its just pissing me off.................
98 j-body sedan
Wow; was not the easiest thing to install
Took for ever trying to get the pin out of the oem door; and that's with the door right off the car. I had to jack her up and take the two bolts out and put the gas fuel door in a vice and use a nail and file to pound out the pin, this took a long time, it was so tight and i had a hard time finding a nail that was thin enough and long enough to fit in the slot where the pin is.
Then i had a hard time getting one of the new pins in, then lining up the fuel door on the car; making sure the gaps were even, crazy; but its all done now; took me like two hours,LOL
98 j-body sedan
Just like yours in your siggy pic
I will try and get a pic up sometime soon; i ant the best with computers, i just got to hook up my digital camera and download software.
Thanks for the help guys, and thank you to joshua(IZNTRBL) for the fuel door.
Get those b-pillers done, LOL.....
98 j-body sedan
