i need someone with a BC2 kit to measure from where the bumper meets the front fender (near the well) to the bottom of the bumper. and i also need the same for the rear.
basically im trying to see how low the kit would sit on air. ive found one BC2 on air, and cant judge from the pics.
also if you have time, could you measure the width of the skirt, from the door seam to the bottom of the skirt.
any help is so greatly appreciated
i dont want to buy the kit only to smash it when i first lay out
actually i can do that for you...just gimme a few minutes.
_________________________________________________________________
this useless post brought to you by the alcoholic known as LUNDiS
ok...ive got a sedan...its not on perfect level ground...and its got @!#$ inside of it.. and i took approximate measurements for you..but its something to go on.
from where the front bumper meets the fender to the ground 23"
from where the bottom of the front bumper (in the wheel well) meets the ground 5 7/8"
sideskirt from top to the ground 11"
bottom of sideskirt to ground 6"
from where the rear bumper meets the quarter panel 25"
from the bottom of the rear bumper to the ground 5 3/4"
these are approximate...but it gives you something to work with.
_________________________________________________________________
this useless post brought to you by the alcoholic known as LUNDiS
lundis wrote:ok...ive got a sedan...its not on perfect level ground...and its got @!#$ inside of it.. and i took approximate measurements for you..but its something to go on.
from where the front bumper meets the fender to the ground 23"
from where the bottom of the front bumper (in the wheel well) meets the ground 5 7/8"
sideskirt from top to the ground 11"
bottom of sideskirt to ground 6"
from where the rear bumper meets the quarter panel 25"
from the bottom of the rear bumper to the ground 5 3/4"
these are approximate...but it gives you something to work with.
so front bumper is 17 1/8"
rear bumper is 19 1/4"
and skirts 5"
is that about right?
thanks also
ballpark...yeah. within 1/4" plus or minus. i didnt go precise...my knees limit my time that low to the ground....god damn it sucks to be fat...
_________________________________________________________________
this useless post brought to you by the alcoholic known as LUNDiS
hey joe did u get my email?
well i'm on air and fully laid out i have about a 1/16th inch clearance at the rear of the sideskirt, and maybe 1/2 to the front and about 1-1/2 on the front dam, but i don't have the rear on yet
^^^thanks man!! what size rims and tires??
sorry for thread jakeing ... but could i get dimentions of the bc2 fornt bumper main opening?
