i just put on my org sticker on this morning, it was foggy and wet out.

i wiped and dried it as much as i could. some of the letters arent sticking too well, any tips on how to re-stick them?



Injection is nice but id rather be BLOWN!

Put them on in drier weather? If you have a squeegee, it might help to go over the letters with the rubber side to try and force some of the moisture out.

Or a driver's license/credit card...

Heck, we put a lot of my stickers on wet glass. That way, you can move the sticker around to get it exactly where you want it and not worry about it sticking.

Anyways, definitely squeegee the stickers to get all the moisture out from under them and then just let the car sit in the sun for a while. If that isn't an option, you can take a blow dryer on LOW heat and hold it away from the glass several inches and constantly move back and forth over the sticker.

For future reference, I never peel the backing off of a sticker until I am sure that it's sticking.

-Crystal

its stuck on there, escept for 2 corners. everything else is golden.



Injection is nice but id rather be BLOWN!

you have to take the backing off


"boobs now with Riboflabin"

hey guys where do u get the org stickers?

HORN BROKEN.....WATCH FOR FINGER!!!

the store link on the left



My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again