please i need to know how to put led under my dash ho do i connect it and to where so it lights up everything i turn my headlights on
i searched the forum didnt finf anything about it
i need st deatailed

Double posting is bad, m'kay

http://www.j-body.org/forums/read.php?f=45&i=82926&t=82926

Did you test the LEDs using a 110v house outlet first?

^^^^ CLASSIC

Joe Schulte wrote:Did you test the LEDs using a 110v house outlet first?

omg i think i just @!#$ myself hahahahahah

Hmm... Kardain instructions must not have been easy enough for you. Here, maybe this will help


Here is the stp by sep...

MAERITALS NEDAED: suitible wire cutetrs suitibel wire stripeers soldrering iron suldrar elcetircail tape moltimeter or test ligtht 6pcak of your favorite beverage wire perfrarbly 2 colors 16g minimum 1 4pin rela and soket


instructons:

rmoave te raydo bexel if you dont no ho stopp her go to the autoparts storae and get a repare manul remoav radyoe if you dont know how refer to the repair manual that you just purchsed using the instructions from this ssite http://www.classictruckshop.com/clubs/earlyburbs/projects/bosch/foglites.htm you are going to need to do the following: usig your multimeter and the wiring diagramsection of your repair manual or go to http://www.the12volt.com for vrious wire colors find a switched 12v source if your car has a seond lighter socket, the positive wire to that socket is switched – refer to your repair manual as to how to access it the switchd 12v will need to be spliced to pin 85 of the relay find a cnstant 12v source that gets spliced to pin 30 of the relay find a round thatgoes to 86 of the relay hint a bolt that attaches to something metal usually is a good ground DISCLAIMER: DO NOT GROUND IRECTLY TO YOUR STEREO the last pin 87 will be the power to your lights wire the power wires to pin 87 wire the ground wires from your ights to a suitable ground

^^^^^^^^ muffin muffin muffin^^^^^^^^^ OMG!!!!!! LMAO