Fenders - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Fenders
Wednesday, February 14, 2007 10:22 PM
Ok i got rear ended the other day while i was at school and the jerkoff that hit my car, ran. Well he crushed my headlight, Right Front fender and my hood. Scratched the bumper a little but that can live for now. What kind of fenders should i go with?

I want wither the JDM Toyota Cavalier Fenders or some Z3 fenders. i was looking at them on ebay and all they were was fiberglass. and i dont really want to poprivit anything on my car and hope it stays.

so what does everyone sudgest i do?

Re: Fenders
Wednesday, February 14, 2007 10:28 PM
ok, assuming that you drive a cavalier (cause you have zero info in your registry), you have several choices for fenders (most are fiberglass).

toyota cavalier steel fender
z3 full fiberglass fender
z3 inserts to mold into a metal or fiberglass fender
f-1 fiberglass fender
x-2 fiberglass fender
(might be a couple other choices, im not really sure).

as for popriviting, not exactly sure what you're getting at there... none of the fenders i've seen get pop rivited on, they bolt on the exact same way a steel fender does. also, don't buy fenders off from ebay. chances are they won't fit very well anyway. get them from a reputable store such as A Plus Performance. if you want to go with the toyota fenders, you can order them through a dealership with the part number (search, i know it's been posted).




Re: Fenders
Wednesday, February 14, 2007 10:32 PM
yes i have all the part numbers to all JDM cavalier parts.

well thats where i began looking at the fenders was Ebay. and thats where the fenders were that had to be poprivited.
And no u dont see any Info on my page because i actually just started using my account.
Re: Fenders
Wednesday, February 14, 2007 10:36 PM
okay i looked at the ones on A Plus Performance and i saw that they use aluminum tabs to bold down in the factory location. But has anyone here used these fenders and how do they fit?
Re: Fenders
Wednesday, February 14, 2007 11:19 PM
i have F-1 fenders that i bought from A+, and when i test fitted them, they were pretty close. no aftermarket fiberglass fender is going to fit 100%, but with a little shim they fit pretty well.

and again, im not sure what you're talking about with tabs and rivits, mine bolted on using the bolts that held the stock fender.




Re: Fenders
Wednesday, February 14, 2007 11:39 PM
i thought you could get steel z3s?
Re: Fenders
Thursday, February 15, 2007 4:17 AM
ok you got rear ended and he crushed your hood, fender and headlight?



Re: Fenders
Thursday, February 15, 2007 5:29 AM
yeah like he backed into my car or somethin and i came out of classes at school and had to call the school police over there




Re: Fenders
Thursday, February 15, 2007 7:51 PM
i have a set of Flawless Bullet (BW2) fenders w/ flawless fitment



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search