Hey everyone, I just got some Cold Cathode Angel Eyes from Josh at IznTrbl (thanks Josh! awesome fast service!) and I'm not 100% sure how to mount them in the headlight, I did a few searches and couldn't find anything, so any help would be awesome! Oh and I have an 03 Cav.
Thanks to WannaBzee for the logo.
Can you even install angel eyes on stock headlights? If you can figure out how to mount them on the bezel, you'll have to open the headlight, oven preheated to 300 degrees, place headlight in oven for approx. 3 min. Carefully pry casing apart and you should be able to figure out the rest.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
yeah you're gonna have a hell of a time doing that.....you have to heat those lenses up just perfect or they'll be a real PITA to pry off, and you'll scratch the inside all to hell depending on what you use. I siliconed mine on and they stayed.
It actually isn't that hard to split the 03+ headlights. I've done like three sets of cutom clear lenses, including mine, total time is about 2 hours, that's splitting the casings, and forming the new lenses.
http://www.j-body.org/members/xls2004/cars/1/
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
Hmm, doesn't sound too difficult, thanks guys.
Thanks to WannaBzee for the logo.
It's really not all that difficult, it's only hard if you don't have patience, and if you break off any clips. That makes reassembly a real pain, I broke one on mine and had to use a clamp on it for 12hours before it would stay together, but with enough silicone in the edges, it stayed sealed.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
Hey Awesome! thanks man!
Thanks to WannaBzee for the logo.
np
My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again
