alright my car is going in for paint next weekend.the way i have my skirts mounted right now is with screws on both ends and in the middle. my question is , how are some of you mounting the skirts? with double sided tape?? if so how long have you had it like that and have you had any problems with it coming loose? thanks in advance fellaz!
I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!
double sided tape across it and screws in the wheel wells is how most do it. works fine....just dont reply on the tape alone and you'll be fine.
also, make sure you get the grayish 3m tape not the white.....whit is for indoor use
alright cool. thanks fellaz
I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!
MAN YOU SUCK RICK!! you never even bother asking any of us about your work needed or how we did something leave your screws and just paint over them ..if not rivets.... I don't know about rivets cause if you ever slam a speed bump hard enough ..oops there goes that skirt.. JUST LEAVE THE SCREWS!!!!
o ya i forgot u got the kit too lol. my mind is gone foo i caint be rememberin everythang. but i think ill leave the 2 end screws and use double sided tape for the center instead of the other 2 screws.
I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!
I added a sht load of sealant inside the skirt to hold extra tight to the panel, plus I also drilled holes along the lower fender wall to secure it with bolts. Us washers along with the bolts.
