Has anybody ever considered using Nightshades on their corner signals. I was thinking about it, as it probably wouldn't look much different than using black housing corners, but was looking for input.
Gotta keep on livin', L-I-V-I-N
It doesn't shine purple, but only a little light shines through, looks a little murky..and nightshades dries flat so you should scuff and clarcoat as well if you do it.
Don't buy from MANTAPART!!
Once again you do not need to cear coat VHT Night shade...Spray it on once it is dry use fine cut, cut poilish and polish it till you get rid of the haze then hit it with car wax to shine it ..Keep doing this until it comes out shiney...You will normal need to spray about 2 coats of the VHT should not need more but if you want it really dark spray more on...But with this product it will not look like much with 2 coats on then all of a sudden it will start to dry and go dark so start with 2 coats of VHT and juge it from there..And it will work fine on side markers I have mine done...Best of Luck..Jason
my reverse lights light up fine.. and clear.. no purple or red.
i did my lower bumper lenses... every color i tried to use shown through purple or really bright red. both are illegal.
and i tried waxing my nightshades after doing my tails and it looked like ass, so i cleared them and they turned out great.
