Sorry to be posting a question on VHT nightshade again, but i searched the forum and didn't see anything on this, but was wondering if anyone has any input on this. Several guys that i have talked to about doing me rear tails say to spray it on the inside of the lense, instead of the outside. has anyone tried this? and if so, does it have the same effect as it does on the outside? just wondering cause i got mine but haven't done my tails yet.

no it will not look the same on the inside of the lens.. def do the outside

i did mine on the outside u can check my pix of them in the photos and media forum 2 coats on the outside,3 coats on the inside, 3 coats of clear on them all. jut make shure u wet sand them really good. then wipe them off with rubbing alc... wait for them to dry them do light coat's any more than 3 coats is too dark mine look super dark durring the day. but are in all actuallity very visable durring the night.

Too much effort to shade the inside. Just do the outside and get them cleared.



John Piparo: I have an erection!! You guys are turning me on!

Thanks guys for the info, we'll see how they turnout.