I got a guy who wants my lambo doors and he has a 97 or 98 cavi. Mine is a 2001 will they fit his? im not sure if his a 2 or 4 door? will they fit a 4 door also? please help. Thanks, Billy

they will fit, but im pretty sure a 4 door uses different shocks than a 2 door, due to the weight difference between them.

Hmmm I found out that he has a 4 door. so will they not work on his?

yes 4drs do use different shocks

Teknik_Z24 wrote:Hmmm I found out that he has a 4 door. so will they not work on his?

they will fit, but the shocks you have will be a long stronger than he needs, so it'll make closing his doors really difficult. he can use your hinges, but he needs to get shocks for a sedan.

i bought 650 pound shock for my four door will they work BTW im no related to the prior discussion lol i bought hinges of a 200 2 door cavi and shocks were water logged so i went andbought new ones and those r 650 pounds each


HON + DA = HONDA AKA PIECE OF TRASH

are lambos difficult to install???
my oem hinges are creekin... so i was thinkin....... hahaha



"Z24 Dustbunny"

WD40 my friend, and no they aren't very difficult. Just need a friend to help out for a few minutes.

WHere do I get replacement shocks for my lambo doors?

Still looking for replacement shocks for lambo doors! What ones should i get for a sedan? Beacuse 1 had the 750lbs on my coupe and that is way to much for my buddys sedan!

email joe at modified-motorsports.com . hes great to deal with. as for the shocks. im almost 99% positive that the 4 doors use 650lbs shocks. but just email him and im sure he can shed some light onto your situation.



I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!

I got some off ebay since the ones i got came off a 2 door and i have a sedan. Not really too hard to close but the dayum things launched up if i wasnt ready.

Are all the threads the same on the shocks? because the ones on ebay just have the threads. and the shocks that i have will unscrew on both ends so that they can bolt up to the hindges. Im not sure the brand that I have?!

Alot of the ones on ebay have just threads to make it cheaper and u just take the ones off yours and put on the new ones. But look threw Ebay a little more and there are a few companies that sell t hem with the ends on them already. I ordered mine that way to make it easier in the long run and I think I paid like 75 total shipped for them both and have worked well for around 6 months so far.