Will a kit on a 95 cavy fit on a 2002? I tried searching but no answers.. help? Thanks!

the front is different. depending on the kit everything else should work..

the rear should work aswell as the sideskirts depending on 4 door or 2 door.

Cool.. Thanks!

2 and 4 door sides are the length


02 Cavalier sedan ECOTEC



well the show car plan sucked,

and i still want boost so im saving for a supercharger and i started building my spare motor

cavalierkid02 ( I WANT BOOST) wrote:2 and 4 door sides are SAME the length

edit


02 Cavalier sedan ECOTEC



well the show car plan sucked,

and i still want boost so im saving for a supercharger and i started building my spare motor

cavalierkid02 ( I WANT BOOST) wrote:

cavalierkid02 ( I WANT BOOST) wrote:2 and 4 door sides are SAME the length

edit

some of the side skirts (trd, type j, drift, etc) come up in the rear where the rear door on a 4 door would be making them more complicated to mount, unless you want to cut the kit and mount part on the door and part underneath.

as for the original question-you have to do some cutting and glassing to make it work. the headlights on the 00-02 cavs go down lower than the 95-99's. it's been done and is definitely possible, but by no means a direct bolt on for the front.